Transics USB Devices Driver



-->Usb

If you connect the printer USB cable to the computer instead of setting up the connection with the HP driver, in most cases Windows automatically detects the printer and installs a 'built-in' driver for basic functionality. A ' Installing device driver software ' notification might display. This release brings the 1st Generation Scarlett Range, iTrack Solo and Saffire 6 USB 2.0 up to the same driver versions as the 2nd and 3rd Generation Scarlett ranges and the Clarett USB range. 1st Generation Scarlett 6i6, 8i6, 18i6, 18i8 and 18i20 continue to be supported by Scarlett Mix Control 1.10. Going into the properties of the Bluetooth USB Host Controller the device status reads: 'The drivers for this device are not installed. (Code 28) There are no compatible drivers for this device. To find a driver for this device, click Update Driver.' Doing this brings me back to my first point. For composite devices, use USB Generic Parent Driver (Usbccgp.sys) that creates physical device objects (PDOs) for each function. For non-composite devices or a function of a composite device, use WinUSB (Winusb.sys). If you are installing USB drivers: You do not need to download USB device class drivers. They are installed automatically. Please be warned that counterfeit (fake) PL-2303HX (Chip Rev A) USB to Serial Controller ICs using Prolific's trademark logo, brandname, and device drivers, were being sold in the China market. Counterfeit IC products show exactly the same outside chip markings but generally are of poor quality and causes Windows driver compatibility issues.

Important

This topic is for programmers. If you are a customer experiencing USB problems, see Troubleshoot common USB problems

This topic lists the Microsoft-provided drivers for the supported USB device classes.

  • Microsoft-provided drivers for USB-IF approved device classes.
  • For composite devices, use USB Generic Parent Driver (Usbccgp.sys) that creates physical device objects (PDOs) for each function.
  • For non-composite devices or a function of a composite device, use WinUSB (Winusb.sys).

If you are installing USB drivers: You do not need to download USB device class drivers. They are installed automatically. These drivers and their installation files are included in Windows. They are available in the WindowsSystem32DriverStoreFileRepository folder. The drivers are updated through Windows Update.

If you are writing a custom driver: Before writing a driver for your USB device, determine whether a Microsoft-provided driver meets the device requirements. If a Microsoft-provided driver is not available for the USB device class to which your device belongs, then consider using generic drivers, Winusb.sys or Usbccgp.sys. Write a driver only when necessary. More guidelines are included in Choosing a driver model for developing a USB client driver.

USB Device classes

USB Device classes are categories of devices with similar characteristics and that perform common functions. Those classes and their specifications are defined by the USB-IF. Each device class is identified by USB-IF approved class, subclass, and protocol codes, all of which are provided by the IHV in device descriptors in the firmware. Microsoft provides in-box drivers for several of those device classes, called USB device class drivers. If a device that belongs to a supported device class is connected to a system, Windows automatically loads the class driver, and the device functions with no additional driver required.

Transics USB Devices Driver

Transics Usb Devices Driver Updater

Hardware vendors should not write drivers for the supported device classes. Windows class drivers might not support all of the features that are described in a class specification. If some of the device's capabilities are not implemented by the class driver, vendors should provide supplementary drivers that work in conjunction with the class driver to support the entire range of functionality provided by the device.

For general information about USB-IF approved device classes see the USB Common Class Specification

The current list of USB class specifications and class codes is documented in the USB-IF Defined Class Code List.

Device setup classes

Windows categorizes devices by device setup classes, which indicate the functionality of the device.

Microsoft defines setup classes for most devices. IHVs and OEMs can define new device setup classes, but only if none of the existing classes apply. For more information, see System-Defined Device Setup Classes.

Two important device setup classes for USB devices are as follows:

  • USBDevice {88BAE032-5A81-49f0-BC3D-A4FF138216D6}: IHVs must use this class for custom devices that do not belong to another class. This class is not used for USB host controllers and hubs.

  • USB {36fc9e60-c465-11cf-8056-444553540000}: IHVs must not use this class for their custom devices. This is reserved for USB host controllers and USB hubs.

The device setup classes are different from USB device classes discussed earlier. For example, an audio device has a USB device class code of 01h in its descriptor. When connected to a system, Windows loads the Microsoft-provided class driver, Usbaudio.sys. In Device Manager, the device is shown under is Sound, video and game controllers, which indicates that the device setup class is Media.

Microsoft-provided USB device class drivers

USB-IF class codeDevice setup classMicrosoft-provided driver and INFWindows supportDescription
Audio (01h)Media
{4d36e96c-e325-11ce-bfc1-08002be10318}
Usbaudio.sys

Wdma_usb.inf

Windows 10 for desktop editions (Home, Pro, Enterprise, and Education)
Windows 10 Mobile
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides support for the USB audio device class by means of the Usbaudio.sys driver. For more information, see 'USBAudio Class System Driver' in Kernel-Mode WDM Audio Components. For more information about Windows audio support, see the Audio Device Technologies for Windows website.
Communications and CDC Control (02h)
Ports
{4D36E978-E325-11CE-BFC1-08002BE10318}
Usbser.sys
Usbser.inf
Windows 10 for desktop editions
Windows 10 Mobile
In Windows 10, a new INF, Usbser.inf, has been added that loads Usbser.sys automatically as the function driver.

For more information, see USB serial driver (Usbser.sys)

Modem
{4D36E96D-E325-11CE-BFC1-08002BE10318}

Note Supports Subclass 02h (ACM)

Usbser.sys
Custom INF that references mdmcpq.inf
Windows 10 for desktop editions
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
In Windows 8.1 and earlier versions, Usbser.sys is not automatically loaded. To load the driver, you need to write an INF that references the modem INF (mdmcpq.inf) and includes [Install] and [Needs] sections.

Starting with Windows Vista, you can enable CDC and Wireless Mobile CDC (WMCDC) support by setting a registry value, as described in Support for the Wireless Mobile Communication Device Class.

When CDC support is enabled, the USB Common Class Generic Parent Driver enumerates interface collections that correspond to CDC and WMCDC Control Models, and assigns physical device objects (PDO) to these collections.

Net
{4d36e972-e325-11ce-bfc1-08002be10318}
Note Supports Subclass 0Eh (MBIM)
wmbclass.sys
Netwmbclass.inf
Windows 10 for desktop editions
Windows 8.1
Windows 8
Starting in Windows 8, Microsoft provides the wmbclass.sys driver, for mobile broadband devices. See, MB Interface Model.
HID (Human Interface Device) (03h)HIDClass
{745a17a0-74d3-11d0-b6fe-00a0c90f57da}
Hidclass.sys
Hidusb.sys
Input.inf
Windows 10 for desktop editions
Windows 10 Mobile
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides the HID class driver (Hidclass.sys) and the miniclass driver (Hidusb.sys) to operate devices that comply with the USB HID Standard. For more information, see HID Architecture and Minidrivers and the HID class driver. For further information about Windows support for input hardware, see the Input and HID - Architecture and Driver Support website.
Physical (05h)---Recommended driver: WinUSB (Winusb.sys)
Image (06h)Image
{6bdd1fc6-810f-11d0-bec7-08002be2092f}
Usbscan.sys
Sti.inf
Windows 10 for desktop editions
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides the Usbscan.sys driver that manages USB digital cameras and scanners for Windows XP and later operating systems. This driver implements the USB component of the Windows Imaging Architecture (WIA). For more information about WIA, see Windows Image Acquisition Drivers and the Windows Imaging Component website. For a description of the role that Usbscan.sys plays in the WIA, see WIA Core Components.
Printer (07h)USB

Note Usbprint.sys enumerates printer devices under the device set up class: Printer

{4d36e979-e325-11ce-bfc1-08002be10318}.

Usbprint.sys
Usbprint.inf
Windows 10 for desktop editions
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides the Usbprint.sys class driver that manages USB printers. For information about implementation of the printer class in Windows, see the Printing - Architecture and Driver Support website.
Mass Storage (08h)
USBUsbstor.sysWindows 10 for desktop editions
Windows 10 Mobile
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides the Usbstor.sys port driver to manage USB mass storage devices with Microsoft's native storage class drivers. For an example device stack that is managed by this driver, see Device Object Example for a USB Mass Storage Device. For information about Windows storage support, see the Storage Technologies website.
SCSIAdapter

{4d36e97b-e325-11ce-bfc1-08002be10318}

SubClass (06) and Protocol (62)
Uaspstor.sys
Uaspstor.inf
Windows 10 for desktop editions
Windows 10 Mobile
Windows 8.1
Windows 8
Uaspstor.sys is the class driver for SuperSpeed USB devices that support bulk stream endpoints. For more information see:
Hub (09h)USB

{36fc9e60-c465-11cf-8056-444553540000}

Usbhub.sys
Usb.inf
Windows 10 for desktop editions
Windows 10 Mobile
Windows 8.1
Windows 8
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides the Usbhub.sys driver for managing USB hubs. For more information about the relationship between the hub class driver and the USB stack, see USB host-side drivers in Windows.
Usbhub3.sys
Usbhub3.inf
Windows 10 for desktop editions
Windows 8.1
Windows 8
Microsoft provides the Usbhub3.sys driver for managing SuperSpeed (USB 3.0) USB hubs.

The driver is loaded when a SuperSpeed hub is attached to an xHCI controller. See USB host-side drivers in Windows.

CDC-Data (0Ah)---Recommended driver: WinUSB (Winusb.sys)
Smart Card (0Bh)SmartCardReader

{50dd5230-ba8a-11d1-bf5d-0000f805f530}

Usbccid.sys (Obsolete)Windows 10 for desktop editions
Windows 7
Windows Server 2008
Windows Vista
Microsoft provides the Usbccid.sys mini-class driver to manage USB smart card readers. For more information about smart card drivers in Windows, see Smart Card Design Guide.

Note that for Windows Server 2003, Windows XP, and Windows 2000, special instructions are required for loading this driver because it might have been released later than the operating system.

Note Usbccid.sys driver has been replaced by UMDF driver, WUDFUsbccidDriver.dll.

WUDFUsbccidDriver.dll
WUDFUsbccidDriver.inf
Windows 8.1
Windows 8
WUDFUsbccidDriver.dll is a user-mode driver for USB CCID Smart Card Reader devices.
Content Security (0Dh)---Recommended driver: USB Generic Parent Driver (Usbccgp.sys). Some content security functionality is implemented in Usbccgp.sys. See Content Security Features in Usbccgp.sys.
Video (0Eh)Image
{6bdd1fc6-810f-11d0-bec7-08002be2092f}
Usbvideo.sys

Usbvideo.inf

Windows 10 for desktop editions

Windows Vista

Microsoft provides USB video class support by means of the Usbvideo.sys driver. For more information, see 'USB Video Class Driver' under AVStream Minidrivers.

Note that for Windows XP, special instructions are required for loading this driver because it might have been released later than the operating system.

Personal Healthcare (0Fh)---Recommended driver: WinUSB (Winusb.sys)
Audio/Video Devices (10h)----
Diagnostic Device (DCh)---Recommended driver: WinUSB (Winusb.sys)
Wireless Controller (E0h)

Note Supports Subclass 01h and Protocol 01h

Bluetooth

{e0cbf06c-cd8b-4647-bb8a-263b43f0f974}

Bthusb.sys

Bth.inf

Windows 10 for desktop editions
Windows 10 Mobile
Windows 8.1
Windows 8
Windows 7
Windows Vista
Microsoft provides the Bthusb.sys miniport driver to manage USB Bluetooth radios. For more information, see Bluetooth Design Guide.
Miscellaneous (EFh)Net

{4d36e972-e325-11ce-bfc1-08002be10318}

Note Supports SubClass 04h and Protocol 01h

Rndismp.sys
Rndismp.inf
Windows 10 for desktop editions
Windows 8.1
Windows 8
Windows 7
Windows Vista
Prior to Windows Vista, support for CDC is limited to the RNDIS-specific implementation of the Abstract Control Model (ACM) with a vendor-unique protocol (bInterfaceProtocol) value of 0xFF. The RNDIS facility centers the management of all 802-style network cards in a single class driver, Rndismp.sys. For a detailed discussion of remote NDIS, see Overview of Remote NDIS. The mapping of remote NDIS to USB is implemented in the Usb8023.sys driver. For further information about networking support in Windows, see the Networking and Wireless Technologies website.
Application Specific (FEh)---Recommended driver: WinUSB (Winusb.sys)
Vendor Specific (FFh)--Windows 10 for desktop editions
Windows 10 Mobile
Recommended driver: WinUSB (Winusb.sys)

Related topics

Google is committed to advancing racial equity for Black communities. See how.

If you are developing on Windows and want to connect a device for testing,then you need to install the appropriate USB driver. This pageprovides links to the web sites for several original equipment manufacturers (OEMs),where you can download the appropriate USB driver for your device.

If you're developing on Mac OS X or Linux, then you shouldn't need a USB driver.Instead read Using Hardware Devices.

To connect and debug with any of the Google Nexus devices using Windows, youneed to install the Google USB driver.

Install a USB driver

First, find the appropriate driver for your device from the OEM driverstable below.

Once you've downloaded your USB driver, follow the instructions below to install or upgrade thedriver, based on your version of Windows and whether you're installing for the first timeor upgrading an existing driver. Then see Using Hardware Devices forother important information about using an Android device fordevelopment.

Caution:You may make changes to android_winusb.inf file found insideusb_driver (for example, to add support for other devices),however, this will lead to security warnings when you install or upgrade thedriver. Making any other changes to the driver files may break the installationprocess.

Windows 10

To install the Android USB driver on Windows 10 for the first time, do the following:

  1. Connect your Android device to your computer's USB port.
  2. From Windows Explorer, open Computer Management.
  3. In the Computer Management left pane, select Device Manager.
  4. In the Device Manager right pane, locate and expand Portable Devices or Other Devices, depending on which one you see.
  5. Right-click the name of the device you connected, and then select Update Driver Software.
  6. In the Hardware Update wizard, select Browse my computer for driver software and click Next.
  7. Click Browse and then locate the USB driver folder. For example, the Google USB Driver is located in android_sdkextrasgoogleusb_driver.
  8. Click Next to install the driver.

Transics USB Devices Driver

Windows 8.1

To install the Android USB driver on Windows 8.1 for the first time, do the following:

  1. Connect your Android device to your computer's USB port.
  2. Access search, as follows:

    Touch screen: On your computer, swipe in from the right edge of the screen and tap Search.

    Using a mouse: Point to the lower-right corner of the screen, move the mouse pointer up, and then click Search.

  3. In the search box, type into and then click Device Manager.
  4. Double-click the device category, and then double-click the device you want.
  5. Click the Driver tab, click Update Driver, and follow the instructions.

Windows 7

To install the Android USB driver on Windows 7 for the first time, do the following:

Transics USB Devices Driver
  1. Connect your Android device to your computer's USB port.
  2. Right-click on Computer from your desktop or Windows Explorer, and select Manage.
  3. Select Devices in the left pane.
  4. Locate and expand Other device in the right pane.
  5. Right-click the device name (such as Nexus S) and select Update Driver Software. This will launch the Hardware Update Wizard.
  6. Select Browse my computer for driver software and click Next.
  7. Click Browse and locate the USB driver folder. (The Google USBDriver is located in android_sdkextrasgoogleusb_driver.)
  8. Click Next to install the driver.

Or, to upgrade an existing Android USB driver on Windows 7 and higher with the newdriver:

  1. Connect your Android device to your computer's USB port.
  2. Right-click on Computer from your desktop or Windows Explorer, and select Manage.
  3. Select Device Manager in the left pane of the Computer Management window.
  4. Locate and expand Android Phone in the right pane.
  5. Right-click on Android Composite ADB Interface and select Update Driver. This will launch the Hardware Update Wizard.
  6. Select Install from a list or specific location and click Next.
  7. Select Search for the best driver in these locations; uncheckSearch removable media; and check Include this location in thesearch.
  8. Click Browse and locate the USB driver folder. (The Google USBDriver is located in android_sdkextrasgoogleusb_driver.)
  9. Click Next to upgrade the driver.

Get OEM drivers

OEMDriver URL
Acer http://www.acer.com/worldwide/support/
alcatel one touch http://www.alcatelonetouch.com/global-en/support/
Asus https://www.asus.com/support/Download-Center/
Blackberry https://swdownloads.blackberry.com/Downloads/entry.do?code=4EE0932F46276313B51570F46266A608
Dell http://support.dell.com/support/downloads/index.aspx?c=us&cs=19&l=en&s=dhs&~ck=anavml
Fujitsu http://www.fmworld.net/product/phone/sp/android/develop/
HTC http://www.htc.com/support
Huawei http://consumer.huawei.com/en/support/index.htm
Intel http://www.intel.com/software/android
Kyocera http://www.kyocera-wireless.com/support/phone_drivers.htm
Lenovo http://support.lenovo.com/us/en/GlobalProductSelector
LGE http://www.lg.com/us/support/software-firmware
Motorola https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481/
MTK http://online.mediatek.com/Public%20Documents/MTK_Android_USB_Driver.zip (ZIP download)
Samsung http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Sharp http://k-tai.sharp.co.jp/support/
Sony Mobile Communications http://developer.sonymobile.com/downloads/drivers/
Toshiba http://support.toshiba.com/sscontent?docId=4001814
Xiaomi http://www.xiaomi.com/c/driver/index.html
ZTE http://support.zte.com.cn/support/news/NewsDetail.aspx?newsId=1000442

If you don't see a link for the manufacturer of your device here, go to the support section of the manufacturer's website and search for USB driver downloads for your device.