• Tactrix Openport 2.0 Driver
• Tactrix Port Devices Driver Download Windows 7
• Tactrix Port Devices Driver Download

Tactrix Inc - Makers of Openport and EcuFlash ECU flashing and tuning software and hardware. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues.

The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress.

We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you'll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you're working on an early non USDM STi in which case you made need one of our WRX adapters. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Mitsubishi, you'll need the adapter for most pre CAN vehicles which include the 5-9 Evo. Choose the adapter you need from the 'Reflash Adapters' drop down list on the right side of this page.

Technical Details

• 72Mhz 32-bit processor
• USB 2.0 full speed device (USB-A/Mini cable included)
• Field upgradeable software
• Supports these major OBD protocols:
  • CAN 2.0 (CAN/ISO15765)
  • K-line (ISO9141/ISO14230(KWP2000)/dual K line)
• J2534 PassThru support with Windows DLL
• Standalone datalogs to microSD / microSDHC card without a laptop
• Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
• Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
• RGB status LEDs

Designed, manufactured, assembled, and tested in San Francisco, USA

Tactrix Store

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

Tactrix Openport 2.0 Driver

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

Tactrix Port Devices Driver Download Windows 7

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

1. Install the device-specific driver (see Method 2).
2. Open Device Manager.
3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
4. Restart the computer.

Tactrix Port Devices Driver Download

When it restarts, Windows will try to reinstall the device by using the device-specific driver.